This product is no longer available.
| Services Available | |
|---|---|
| Repair | No |
| Calibration | Yes |
| Free Support | No |
Overview
Note: Although the CR5000 is a retired product, the same performance can be achieved using a CR6 Measurement and Control Datalogger with a CDM-A116 (16-Channel 5 V Analog Input Module).
The CR5000 is a rugged, high-performance data-acquisition system with built-in keyboard, graphics display, and PCMCIA card slot. It combines 16-bit resolution with a maximum throughput of 5000 measurements per second. It has many input channels and can measure a large number of sensors. This makes the CR5000 a key part of automotive, structural, and high-speed environmental applications.
Read MoreBenefits and Features
- High throughput makes the CR5000 a powerful tool for demanding configurations.
- Ideal applications include eddy covariance, Bowen ratio, weather stations, vehicle testing, HVAC, process monitoring and control, structural or fatigue analysis, machinery testing, energy management and conservation
- Integrated keyboard and display screen let you program, manually initiate data transfers, and view data, all on site.
- Integrated PCMCIA slot accepts memory cards up to 2 GB for stand-alone data collecting.
- Includes a current excitation channel allowing direct connection of PRTs or other sensors that use a current excitation
- Compatible with channel expansion peripherals allowing you to expand your system
- Gas Discharge Tube (GDT) protected inputs
- Battery-backed clock that ensures accurate time is maintained while data logger is disconnected from battery power
- Collects and stores data and controls peripherals as the brain of your system
Images
Detailed Description
The CR5000 typically includes an integrated 7-Ahr rechargeable power supply, but a no battery base option is also offered if a user-supplied power supply is preferred. This data logger has a 128 x 64 pixel backlit graphical or eight-line numeric display, and a 16-character keyboard for on-site control. Its on-board PCMCIA card slot allows the CR5000 to store data on a Type I, Type II, or Type III PCMCIA card, or on a CompactFlash® card if an adapter is used.
The CR5000's operating system includes measurement, processing, and output instructions for programming the data logger. The programming language, CRBasic, uses a BASIC-like syntax. Measurement instructions specific to bridge configurations, voltage outputs, thermocouples, and pulse/frequency signals are included. Processing instructions support algebraic, statistical, and transcendental functions for on-site processing. Output instructions process data over time and control external devices. These instructions include averages, maximums, minimums, standard deviations, histograms, rainflow histograms, level crossings, and Fast Fourier Transfers (FFTs).
Specifications
| -NOTE- | Note: Additional specifications are listed in the CR5000 Specifications Sheet. |
| Maximum Scan Rate | 1667 Hz |
| Analog Inputs | 40 single-ended or 20 differential individually configured |
| Pulse Counters | 2 |
| Switched Excitation Channels | 4 voltage, 4 current |
| Continuous Analog Outputs | 2 |
| Digital Ports | 1 SDM and 8 I/Os (Certain digital ports can be used to count switch closures.) |
| Communication Ports | 1 CS I/O, 1 RS-232 |
| Switched 12 Volt | 1 |
| Input Voltage Range | ±5 Vdc |
| Analog Voltage Accuracy | ±0.05% FSR (0° to 40°C) |
| Analog Resolution | 0.33 µV |
| A/D Bits | 16 |
| Standard Temperature Range |
-25° to +50°C The rechargeable battery base has a different temperature range (-40° to +60°C). |
| Extended Temperature Range |
-55° to +85°C The rechargeable battery base has a different temperature range (-40° to +60°C). |
| Memory |
|
| Power Requirements | 11 to 16 Vdc |
| Typical Current Drain |
|
| Protocols Supported | SDI-12, SDM |
| CE Compliance Standards to which Conformity Is Declared | IEC61326:2002 |
| Warranty | 3 years |
| Dimensions |
|
| Weight |
|
Compatibility
Note: The following shows notable compatibility information. It is not a comprehensive list of all compatible or incompatible products.
Software
| Product | Compatible | Note |
|---|---|---|
| LoggerNet | Version 2.0 or higher | |
| PC200W (retired) | ||
| PC400 | Version 1.0 or higher | |
| RTDAQ | Version 1.0 or higher | |
| Short Cut | ||
| VISUALWEATHER | Version 2.0 or higher |
Additional Compatibility Information
Sensors
With several channel types, the CR5000 is compatible with nearly every available sensor, including thermocouples, SDI-12 sensors, and 4 to 20 mA sensors.
Measurement & Control Peripherals
The CR5000 is compatible with our multiplexers, vibrating-wire interfaces, terminal input modules, relays, and most of our SDMs.
Communications
The CR5000 communicates with a PC via direct connect, NL100 Ethernet interface, multidrop modems, short-haul modems, phone modems (land line and digital cellular), RF telemetry, and GOES satellite transmitter. Data can be viewed on its on-board keyboard display.
Storage capacity can be increased by using a PC or CompactFlash card. The CR5000's PCMCIA card slot supports one Type I, Type II, or Type III PC Card or the CF1 adapter and one CompactFlash (CF) card.
The storage capacity of Type II cards exceeds 1 GB. Type III cards provide data storage capacities exceeding 1 GB but may not be suitable for all environments. Campbell Scientific offers CF cards that store up to 2 GB of data. Please note that the PCMCIA and CompactFlash cards need to be industrial-grade and have a storage capacity of 2 GB or less.
Power Supplies
The CR5000 is often powered by its on-board rechargeable power supply (see Ordering Info). When the rechargeable power supply is used, its internal 7-Ahr sealed rechargeable battery needs be charged via a vehicle (requires the DCDC18R), solar panel, or ac wall charger.
The CR5000 can also come with a low-profile base that requires a user-supplied dc source. It is preferred when the system’s power consumption needs a larger capacity battery or when it’s advantageous to have a thinner, lighter data logger.
Software
CRBasic, the CR5000's full programming language, supports simple or complex programming and many onboard data reduction processes.
Documents
Technical Papers
Miscellaneous
Downloads
CR5000 OS v.7 (3.0 MB) 02-26-2014
Current Operating System, Compiler and CR5000 support files for the CRBasic Editor. Requires the Device Configuration Utility, LoggerNet or RTDAQ to upload.
Use of this file will update the datalogger support files for the CRBasic Editor included in LoggerNet and RTDAQ.
Note: If the current Operating System on a CR5000 is version 2.1 or earlier (and no higher OS version has been loaded in the past) then it is necessary to load the "intermediate.obj" OS (included with this download) onto the CR5000 first before installing the Std7 OS (CR5000.Std.07.obj).
Device Configuration Utility v.2.30 (46.9 MB) 10-02-2024
A software utility used to download operating systems and set up Campbell Scientific hardware. Also will update PakBus Graph and the Network Planner if they have been installed previously by another Campbell Scientific software package.
Supported Operating Systems:
Windows 11 or 10 (Both 32 and 64 bit)
Frequently Asked Questions
Number of FAQs related to CR5000: 75
Expand AllCollapse All
-
No filtering is available.
-
If a connection can be made to the CR5000 via the RF radio using LoggerNet, the radio is connected to the CR5000.
-
Yes. All eight control terminals can be used as pulse terminals.
-
No. This is not possible because the CR5000 is not compatible with PakBus networking.
-
Create a multidrop network with an MD485 between the CR5000s and the digital modem. See the “Digital Cellular Modem to MD485 Network” appendix item in the MD485 instruction manual.
-
First, determine if the new PC card has been formatted correctly for the CR5000 OS version. CR5000 OS 2.5 can work with FAT32 cards, whereas prior OSs can only work with FAT cards. Most new cards come formatted as FAT32. Either update the CR5000 OS to use FAT32 cards, or continue to use an old OS by reformatting the card to FAT.
To format the card as FAT:
- Put the card in the PC card slot.
- Click My Computer from the Windows Start Menu.
- Right-click the drive that contains the card.
- Mouse over the options and click Format.
- Under File System, select FAT (not FAT32).
- Make sure Quick Format is not selected; then click Start.
-
No. The CR5000 has a precision current excitation terminal. An RTD can be measured using a single precision current excitation terminal and one differential analog input terminal.
-
Multiple CR5000s may not be directly connected to a single cellular digital modem.
-
The display contrast is set too dark for the specific ambient temperature. Press the Esc key several times, and use the left arrow key to lighten the contrast. If necessary, darken the contrast with the right arrow key.
-
Create additional scans using the SlowSequence instruction.
Case Studies
The Illinois Department of Transportation ran tests on twelve interstate highway bridges in Illinois along......read more
Amidst a vast expanse of farming and range lands, bridge designers from the Montana Department......read more
Articles and Press Releases
Newsletter Articles
Privacy Policy Update
We've updated our privacy policy. Learn More
Cookie Consent
Update your cookie preferences. Update Cookie Preferences