Short Cut Program Generator for Windows (SCWin)
Simple way to generate data logger programs
Overview
Short Cut Program Generator (SCWin) is a free, menu-driven, PC-compatible software package that simplifies the creation of data logger programs; it creates a data logger program in seven easy steps.
To download Short Cut, refer to the Downloads section or click the Download Now button.
Read MoreBenefits and Features
- Creates a data logger program in seven easy steps.
- Generates a printable wiring diagram.
- Supports both standard sensors and generic measurements (e.g., bridge, pulse).
- Supports the AM25T, AM16/32B, AM16/32A, AM16/32, AM416, and AM32 multiplexers.
- Supports CDM and GRANITE VOLT Analog Input Modules.
- Supports GRANITE TEMP Thermocouple Modules.
- Supports the AVW200 2-Channel Vibrating Wire Analyzer Module.
- Supports ET106, ET107, and MetData1 Weather Stations.
- Includes a reference crop evapotranspiration calculation module and other mathematical calculations.
- Can be downloaded free of charge; see Downloads section or Download Now button on web page.
Images
Detailed Description
Originally intended to support meteorological and hydrological applications, the initial releases of Short Cut (SCWin) supported over 120 sensors. Now, with additional program generation capabilities, Short Cut supports programming for our multiplexers, AVW200-series Vibrating Wire Interfaces, ET107 stations, ET106 stations, MetData1 stations, and most sensors that can be measured by our data loggers.
Short Cut allows the user to select sensors and choose output data. Short Cut then creates a wiring diagram and a program file for transfer to the data logger. It also includes support for algebraic entry of expressions.
Specifications
| Operating System | Windows 11 and 10 (Both 32- and 64-bit operating systems are supported.) |
| Requirement | .NET 4.0 |
| Purchased Separately | Free download |
| Software Level | Entry |
| Communications Supported | N/A (program generator only) |
| Scheduled Data Collection Supported | N/A (program generator only) |
| Data Display Supported | N/A (program generator only) |
Compatibility
Note: The following shows notable compatibility information. It is not a comprehensive list of all compatible or incompatible products.
Data Loggers
| Product | Compatible | Note |
|---|---|---|
| 21X (retired) | ||
| CR10 (retired) | ||
| CR1000 (retired) | ||
| CR1000X | ||
| CR10X (retired) | ||
| CR200X (retired) | ||
| CR206X (retired) | ||
| CR211X (retired) | ||
| CR216X (retired) | ||
| CR23X (retired) | ||
| CR295X (retired) | ||
| CR300 | ||
| CR3000 (retired) | ||
| CR310 | ||
| CR350 | ||
| CR500 (retired) | ||
| CR5000 (retired) | ||
| CR510 (retired) | ||
| CR6 | ||
| CR800 (retired) | ||
| CR850 (retired) | ||
| CR9000 (retired) | ||
| CR9000X (retired) |
Distributed Data Acquisition
| Product | Compatible | Note |
|---|---|---|
| Granite 10 | ||
| Granite 6 | ||
| Granite 9 |
Additional Compatibility Information
Computer Requirements
Computer operating systems—Windows 10 and 11. Short Cut runs on both 32-bit and 64-bit versions of these operating systems.
Product Support
Short Cut supports more than 100 sensors (including generic measurements), multiplexers, AVW200-series vibrating wire interfaces, and the ET107.
Documents
Brochures
Downloads
Short Cut v.4.6 (32.6 MB) 10-02-2024
Short Cut creates simple programs for our CR200-series, CR300-series, CR510, CR500, CR10(X), 21X, CR23X, CR6, CR800, CR1000(X), CR1000Xe, CR3000, CR5000, CR9000X and GRANITE dataloggers. Both mixed array and table data operating systems are supported. Short Cut also supports our ET106, ET107 and MetData1 weather stations. The newest version includes the latest sensor files.
SnowVue 10 Patch for Short Cut v4.4 v.1.0 (3.10 MB) 10-25-2022
This patch adds SnowVue 10 support to ShortCut version 4.4.
Frequently Asked Questions
Number of FAQs related to Short Cut: 15
Expand AllCollapse All
-
The SCWin revision history information can be found through the “Software and OS Revision Histories” web page for Short Cut.
-
No. A CRBasic or Edlog data logger editor (included in PC400 and LoggerNet software) is needed to write program code for the TDR100. Short Cut for Windows (SCWin) is not designed to handle the many variables of the TDR100.
-
Short Cut does not allow mV readings. To record the raw mV data before it is converted to NTU, open the Short Cut file in the CRBasic Editor, and alter the program manually.
-
Yes. In the Water | Level & Flow folder, there is the option to select CS475/CS476/CS477 Radar Water Level Sensor. Click to move the selection to the Selected device window, and enter the SDI-12 address.
-
It is possible that an older version of Short Cut is being used. Download the latest version of Short Cut.
For programming assistance, consult the NR01-L instruction manual. For additional assistance, contact Campbell Scientific.
-
The Half Bridge instruction should be selected (not the 3 Wire or 4 Wire options) in Short Cut. The following parameters are data logger specific, but the following can be used on the CR1000 datalogger with the sensor wired to SE1, and Vx1:
How many HalfBr Sensors? 1 Total Bridge Resistance 1000 ohm Excitation Voltage 2500 mV Sensors per excitation channel 1 Range of sensor voltage 2500 mV Reverse Excitation Yes Measurement Integration 50 or 60Hz
Settling Time 20000 µs Multiplier Determined during installation (see manual) Offset Determined during installation (see manual) -
We do not offer an individual manual for SCWin (Short Cut for Windows). Short Cut information is provided in the LoggerNet, RTDAQ, and PC400 manuals. Information can also be obtained from the Help screens within SCWin.
-
A free program generator for all Campbell Scientific data loggers is Short Cut for Windows (SCWin). Short Cut can be used to create programs in many situations where Campbell Scientific equipment is used. The Campbell Scientific YouTube channel has a two-part series on using Short Cut.
In situations where program requirements are too complex or specialized for Short Cut, programs can be written in any text editor that can edit and save plain ASCII text. However, creating an error-free program would be very difficult. The CRBasic Editor that comes with PC400 and LoggerNet provides a programming environment with procedure templates, integrated help, programming examples, the ability to test compile the program before sending it, and many other features that can be very helpful when developing a program.
-
The easiest way to program a data logger is to use SCWin (Short Cut for Windows). SCWin is available as a free download in the Downloads section of the SCWin product page. SCWin assigns the physical channels (connect the sensors according to the wiring diagram provided) and writes the program using the appropriate instructions and instruction parameters for the sensors selected by the user.
-
No. Campbell Scientific recommends tracking the battery voltage, program signature, and data logger temperature over time for troubleshooting purposes.
Articles and Press Releases
Blog Articles
-
5 Steps to Post Your CR6 Data to Weather Underground
03-23-2016 Author: Sam Utley -
How to Create Custom Sensors in Short Cut
02-24-2016 Author: Jason Ritter
Newsletter Articles
Privacy Policy Update
We've updated our privacy policy. Learn More
Cookie Consent
Update your cookie preferences. Update Cookie Preferences