Services Available | |
---|---|
Repair | No |
Calibration | No |
Free Support | No |
Current Version: 2.33
The PCONNECTCE/U upgrade is for customers who have previously purchased PConnectCE software.
The PDA-to-RS232 cable (available as of the 2.0 version) is included in the upgrade. Inclusion of the connector allows a customer who purchases an upgrade from 1.X to 2.0 to have all of the items that are included in a full PConnect (non-upgrade) 2.0 package.
Read MorePConnectCE/U upgrades PConnectCE 1.x to version 2.33.
The PDA-to-CS I/O connector is NOT included; however, the PDA-to-RS232 cable (available as of the 2.0 version) is included in the upgrade. Inclusion of the connector allows a customer who purchases an upgrade from 1.X to 2.x to have all of the items that are included in a full PConnectCE (non-upgrade) 2.x package.
Learn more about its capabilities on the PConnectCE product page.
Current Version | 2.33 |
Note: The following shows notable compatibility information. It is not a comprehensive list of all compatible or incompatible products.
Product | Compatible | Note |
---|---|---|
21X (retired) | ||
CR10 (retired) | ||
CR1000 (retired) | The CR200X-series and CR1000 dataloggers require PConnectCE version 2.0 or higher. | |
CR10X (retired) | For the CR510, CR10X, and CR23X, support for both the mixed-array and PakBus® data logger operating systems is provided in PConnectCE version 2.0 or higher; prior versions only supported the mixed-array OS. | |
CR200X (retired) | The CR200X-series and CR1000 dataloggers require PConnectCE version 2.0 or higher. | |
CR206X (retired) | The CR200X-series and CR1000 dataloggers require PConnectCE version 2.0 or higher. | |
CR211X (retired) | The CR200X-series and CR1000 dataloggers require PConnectCE version 2.0 or higher. | |
CR216X (retired) | The CR200X-series and CR1000 dataloggers require PConnectCE version 2.0 or higher. | |
CR23X (retired) | For the CR510, CR10X, and CR23X, support for both the mixed-array and PakBus® data logger operating systems is provided in PConnectCE version 2.0 or higher; prior versions only supported the mixed-array OS. | |
CR295X (retired) | The CR200X-series and CR1000 dataloggers require PConnectCE version 2.0 or higher. | |
CR3000 (retired) | The CR3000 requires PConnectCE version 2.1 or higher. | |
CR500 (retired) | ||
CR5000 (retired) | ||
CR510 (retired) | For the CR510, CR10X, and CR23X, support for both the mixed-array and PakBus® data logger operating systems is provided in PConnectCE version 2.0 or higher; prior versions only supported the mixed-array OS. | |
CR800 (retired) | The CR800 and CR850 require PConnectCE version 2.2 or higher. | |
CR850 (retired) | The CR800 and CR850 require PConnectCE version 2.2 or higher. | |
CR9000 (retired) | ||
CR9000X (retired) |
--OR--
PDA-to-serial cable or cradle (one end of the cable/cradle must terminate in a 9-pin serial connector) is required. The cable/cradle connects to the PDA-to-CS I/O connector or PDA-to-RS232 cable via the 9-pin serial connector. This cable/cradle may be included with the PDA, or it may need to be purchased as a separate accessory from the PDA manufacturer or a third party supplier.
Third-party Bluetooth serial adapter is required. The interface and/or cables that are used to connect the adapter to the data logger will vary, depending upon whether the device acts like a DTE (computer) device or DCE (PDA) device. In some instances, this is evident by the pin-out of the adapter, but not always. A general rule is if the adapter has a 9-pin female connector, then the adapter is connected to the data logger using the PDA-to-CS I/O connector for the CS I/O port or the PDA-to-RS232 cable for the RS-232 port. If the adapter has a 9-pin male connector, then the adapter is connected to the data logger using an SC32B for the CS I/O port or it can be connected directly to the RS-232 port.
We've updated our privacy policy. Learn More
Update your cookie preferences. Update Cookie Preferences