Services Available | |
---|---|
Repair | No |
Calibration | No |
Free Support | No |
The FGR-115RC operated in the 902-928 MHz frequency range. Transmission range was up to 60 miles (please note that line-of-sight obstructions, RF interference, and antenna type affected transmission distance).
Read MoreThe FGR-115RC supported point-to-point and point-to-multipoint networks. It could serve as a field radio/modem connected to a data logger, as a stand-alone repeater not connected to a data logger, or as a base station radio/modem connected to a computer.
Freewave's FGR-115RC 1-Watt Spread Spectrum Radio was retired in July 2007.
Operating Frequency | 902 to 928 MHz |
Type | Frequency Hopping Spread Spectrum (FHSS) Transceiver |
Modulation | GFSK, 115.2 kbps or 153.6 kbps |
Hopping Bands | 7, user selectable |
Hopping Channels | 50 to 112, user selectable |
Frequency Hopping Patterns | 15 per band, 105 total, user selectable |
Occupied Bandwidth | 230 kHz |
Transmitter Power Output | 100 mW to 1 W (+30 dBm) |
Antenna Connector | Type N Female |
Receiver Sensitivity |
|
Operating Temperature Range | -40° to +75°C |
Power | 6 to 30 Vdc |
I/O Data Rate | 38,400 to 115,200 bps |
RS-232 Connector | 9-pin “D” DCE |
Dimensions | 16.5 x 7.4 x 5.7 cm (6.5 x 2.9 x 2.2 in.) |
Weight | 441 g (15.5 oz) |
Average Current Drain |
|
Sleep | 6 mA |
Idle | 21 mA |
Receiving | 86 mA |
Transmitting | 500 mA |
Note: The following shows notable compatibility information. It is not a comprehensive list of all compatible or incompatible products.
Product | Compatible | Note |
---|---|---|
21X (retired) | ||
CR10 (retired) | ||
CR1000 (retired) | ||
CR10X (retired) | ||
CR200X (retired) | The internal radio of the CR200X-series dataloggers should not be used with the FGR-115RC. | |
CR206X (retired) | The internal radio of the CR200X-series dataloggers should not be used with the FGR-115RC. | |
CR211X (retired) | The internal radio of the CR200X-series dataloggers should not be used with the FGR-115RC. | |
CR216X (retired) | The internal radio of the CR200X-series dataloggers should not be used with the FGR-115RC. | |
CR23X (retired) | ||
CR295X (retired) | The internal radio of the CR200X-series dataloggers should not be used with the FGR-115RC. | |
CR3000 (retired) | ||
CR500 (retired) | ||
CR5000 (retired) | ||
CR510 (retired) | ||
CR800 (retired) | ||
CR850 (retired) | ||
CR9000 (retired) | Although the CR9000 is compatible, the FGR-115RC radio does not support is fastest communication rates, and is therefore not practical for most of its applications. | |
CR9000X (retired) | Although the CR9000X is compatible, the FGR-115RC radio does not support is fastest communication rates, and is therefore not practical for most of its applications. |
The FGR-115RC can be used in networks containing RF450 radios. Campbell Scientific does not recommend using it with our RF401-series or RF430-series radios.
We've updated our privacy policy. Learn More
Update your cookie preferences. Update Cookie Preferences