Our full technical support staff does not monitor this forum. If you need assistance from a member of our staff, please submit your question from the Ask a Question page.


Log in or register to post/reply in the forum.
Question/Topic Posted By Replies
Time change did not go as expected this weekend! tjwilli_58 4
CR1000X connect AM16/32B (use 3WHB10K) dreamfox7612 8
RTMC is not collecting from the server Husameldin 0
USR drive files sorting Jamal 1
Station name missing when creating a new program via short cut option VictorL 1
Processing CR3000 Overwritten Files Bibek 3
Multiple DataTable in single EmailRelay TLT 2
COM320 Voice Modem IslandMan 3
CR6 can't connect remotely everhamme 2
NRG's #40C and NRG200M with CR1000X Salman Faisal 6
ethernet port CR1000x is not working after overvoltage incident Azamat 2
NetworkTimeProtocol CR1000X - no correct adjustement GNWCLZ 3
bmp5 via serial : dropping data? jankplus 4
Measuring on-time of a heater Dale Reid 2
CR1000 Terminal Emulator MatthewLeak 9
SR50A humidity problems matern 5
problem with "the datalogger's PakBus address is 4095" Tomek 13
CR800/850 program to run on CR300 Paul S 7
Device Config doesn't communicate with SoilVue 10 Cody Cochran 19
CR1000 don't work Jun2024 3
Posting data to Google Drive/etc. using the CR310? ElectricAnt 19
Error Connection through LoggerNet VDC 2
Running two sets of differently-timed measurements jkyoung 5
Logger and ntp server synchronization problem john,park 2
TDR Acclima Waveform Roberto DM 7
Receiving data from IP camera with CR1000X Johannes 2
NTP server synchronized error john,park 3
PakBus framing errors - reboot clears this up for a short time tjwilli_58 8
Header is sent every time when sending multiple files over FTP Tiberiu 8
Measure infiltration rate Humble_Sampler 1