Image Not Available
Services Available | |
---|---|
Repair | Yes |
Free Support | Yes |
The SP10R-PW is a 10 W photovoltaic power source capable of recharging batteries. Its 6.1 m (20 ft) cable terminates in a connector that attaches to a Campbell Scientific prewired enclosure.
The SP10R-PW is similar to the SP10-PW except it contains an on-board voltage regulator, allowing the SP10R-PW to supply power to a user-supplied battery mounted inside a Campbell Scientific prewired enclosure (PWENC).
Read MoreThe SP10-PW includes mounting hardware consisting of two part no. 17492 U-bolt and matching nuts. The U-bolt has a 5.398 cm (2.125 in.) space between the U-bolt legs. This hardware allows the solar panel to be mounted to a 0.75 in. to 1.5 in. IPS pipe [25.4 in. to 50.8 cm (1 in. to 2 in.) OD].
Please note that the SP20R-PW has a 2-mA continuous current drain (meaning that it consumes a small amount of power from the connected battery at night).
-NOTE- | Solar panel characteristics assume 1 kW m-2 illumination and 25°C solar panel temperature. Individual panels may vary up to 10%. The output panel voltage increases as the panel temperature decreases. |
Maximum Peak Power | 10 W |
Current at Peak | 0.59 A |
Voltage at Peak | 16.8 V |
Current Drain | 2 mA (continuous) |
Cable Length | 6.1 m (20 ft) |
Dimensions | 41.9 x 26.9 x 2.3 cm (16.5 x 10.6 x 0.9 in.) |
Weight | 3.0 kg (6.6 lb) |
The SP10R-PW is compatible with user-supplied, 12 V flooded batteries such as deep cycle marine or RV batteries. It is not compatible with 12 V gel cell or AGM lead acid batteries such as the batteries contained in the BP12 or BP24 battery packs.
We've updated our privacy policy. Learn More
Update your cookie preferences. Update Cookie Preferences