NL121 Ethernet Interface

Ordering Info Ask a Question Ask a Question

Ethernet Communications / NL121

Adds Ethernet Connectivity
Connect a CR1000 or CR3000 to an IP network

Images
Specifications
Compatibility
Documents
Videos & Tutorials
FAQs
Case Studies
Articles
Associations

Overview

The NL121 is the easiest and lowest-cost way to add an Ethernet interface connection to your CR1000 or CR3000. This small device, about the size of a deck of cards, simply plugs onto the data logger’s peripheral port. Through the NL121, you can access the Internet capabilities of your data logger, such as PakBus, Modbus, and DNP3 over TCP, as well as web, email, file transfer, and cloud-based application clients. You can collect from and control your data logger over any standard IP network—within your office or across the Internet.

Benefits and Features

The easiest way to add Ethernet to a CR1000 or CR3000
Provides a native Ethernet connection, allowing the data logger to communicate directly using a variety of Internet protocols
Integrated protection for surge and ESD
Data-logger-controlled power management for low-power operation

Images

NL121

NL121 connected directly to the peripheral port of the CR1000 (sold separately)

CAD Files:

NL121 2D (DXF)
NL121 2D (PDF)

Specifications

Transmission Distance or Area	Worldwide
Data Logger Interface	40-pin peripheral port on CR1000 or CR3000
Ethernet	10/100 Mbps, auto-detect 10BaseT/100Base-TX, full/half duplex, IEEE 802.3, auto MDI/MDI-X
Power Source	12 V from data logger 40-pin peripheral port
Power Consumption	58 mA (typical) 3 mA (Ethernet off)
Operating Temperature Range	-40° to +70°C
Service Requirements	Ethernet access
Dimensions	10.2 x 6.4 x 2.8 cm (4.0 x 2.5 x 1.1 in.)
Weight	66.62 g (2.35 oz)

Compliance
Application of Council Directive(s)	2004/108/EC Electromagnetic Compatibility Directive (EMC)
2011/65/EU	The Restriction of Hazardous Substances Directive (RoHS2)
Product Standard	EN 61326-1:2013 – Electrical Equipment for measurement, control and laboratory use (EMC requirements – for use in industrial locations)

Compatibility

Data Logger Requirements

A CR1000 or CR3000 datalogger using operating system version 28 or greater is required.

Documents

Compliance

Videos & Tutorials

Hughes 9502 Inmarsat BGAN Satellite IP Terminal - 13:08

Frequently Asked Questions

Number of FAQs related to NL121: 6

Expand AllCollapse All

Why would someone purchase an NL121?

The NL121 can be used to add an Ethernet connection to a data logger.
Why is it preferable to purchase an NL121 instead of a third-party interface?

Compared to a third-party interface, the NL121 is easier to attach, easier to use, performs better, provides access to the IP services and clients in the data logger OS, and is easier to control through CRBasic commands and data logger settings due to its integrated nature.
What is the difference between the NL121 and the NL201?

The NL121 plugs into the data logger and doesn't require an additional cable to work. The NL121 also doesn't take up much extra space. Because the NL121 has a faster interface to the data logger than the NL201 does, the NL121 communicates faster.

The NL201 has to be mounted next to the data logger and requires a cable to connect to it. Also, the NL201 requires some additional configuration so that it will work with the data logger. For example, choices have to be made regarding how the NL201 is connected to the data logger.
Why is it helpful to add an Ethernet connection to a data logger?

By adding an Ethernet connection to a data logger, a user can communicate with the data logger over an Internet connection. This allows a user to administer the data logger remotely over a company network or from across the Internet. A user can collect data, reconfigure, and update a data logger without having to be onsite.
What is the difference between the NL121 and the NL116?

The NL116 is the same as the NL121, with the addition of a CompactFlash card slot that can be used with a removable CompactFlash card to extend data storage and data collection.
What is the recommended cable length between an NL device and an Ethernet repeater, hub, switch, or router?

The maximum recommended segment length (length of cable between the NL device and the Ethernet repeater, hub, switch, or router it is connected to) for 10Base-T and 100Base-Tx networks using CAT5e cable is 100 m.

Visit the FAQ Library

Case Studies

Spain: Securing Structural Integrity
Background In 2022, ECR Medio Ambiente assumed the responsibility of overseeing the structural monitoring installation at......read more