Hi all,
How can i get an picture (jpeg) shown at a certain value?
Can you please be more specific, what software are you running and what exactly do you want to achieve??
For example in the RTMC software there is a multi-state alarm that will do what you want if that is the software you are using.
Cheers,
Scott.
Hi Scott,
Thanks, didnt know that feature.
I also like to know how i can get an Arrow displayed in my wind direction graph (if possible...)instead of the direction in numbers. Especially the 10 min average wind direction. Also in my table display.
Ive already an Arrow showing the winddirection realtime (1 sec.) which is an image with variable rotation.
Im using:
CR1000 datalogger
Loggernet 4.0
RTMC Pro
Cheers,
Mark
Use the "Compass" in RTMC or RTMC Pro.
no i mean like this, a 10 min graph so each ten minutes an Arrow shown...
think i must use some kind of timestamp in RTMC Pro...?
Anyone got an idea?
Currently im using this:
StartRelativeToNewest(40 *nsecPerMin,OrderCollected);ValueAtTime("Server:CR1000.Table1.Windskm",Timestamp("Server:CR1000.Table1.Windskm"),40 *nsecPerMin, $"invalid")
But i want to have read from old to new data, now its from new to old...
in other words, i want to display the value from windskm at 22:00 o clock in rtmc...
* Last updated by: Mavada on 11/7/2012 @ 3:18 PM *
cmon guys, anybody an idea?
for instance, i want to know the Windskm (10 min average windspeed) value stored at 08:00...
This doesnt work:
ValueAtTime("Server:CR1000.Table1.Windskm"),TimeStamp("Server:CR1000.Table1.Windskm"), 08:00)
This one works for now, but i have to increase the 10 value in every digital display so it shows every 10 min average after 0:00:00 in seperate displays...
Or is there a more simple solution?
StartRelativeToNewest(1*nSecPerDay,OrderCollected);ValueAtTime("Server:CR1000.Table1.Windskm",TimeStamp("Server:CR1000.Table1.Windskm"),IIF(TimeStamp("Server:CR1000.Table1.Windskm") MOD nSecPerDay<nSecPerMin*10,TimeStamp("Server:CR1000.Table1.Windskm") MOD nSecPerDay+nSecPerMin*1,TimeStamp("Server:CR1000.Table1.Windskm") MOD nSecPerDay-nSecPerMin*10),6999)
yes it works, but when my report range goes further back one day, it shows 69999 cos it wont go further back. How to solve this...?