Services Available | |
---|---|
Repair | No |
Calibration | No |
Free Support | No |
The FGR-115RE provided a transmission range of up to 60 miles (please note that line-of-sight obstructions, RF interference, and antenna type affected transmission distance). The FGR-115RE had a 10baseT Ethernet connector making it an ideal base station radio/modem when data needed to be transmitted over a local area network or the Internet. The FGR-115RE could also serve as a stand-alone repeater radio/modem. Campbell Scientific did not recommend using the FGR-115RE at the field site because it did not have an RS-232 connector. Either an NL100 or NL115 was required to connect it to a data logger.
Read MoreThe FGR-115RE had a 10baseT Ethernet connector making it an ideal base station radio/modem when data needed to be transmitted over a local area network or the Internet. Campbell Scientific did not recommend using the FGR-115RE at the field site because it did not have an RS-232 connector. Either an NL100 or NL115 was required to connect it to a data logger.
The FGR-115RE radio spread the normally narrowband information signal over a relatively wide band of frequencies. This process made communications more immune to noise and interference from RF sources such as pagers, cellular phones, and multi-path. User-selectable frequency hopping patterns reduced the radio's susceptibility to RF interference from other spread spectrum devices.
The FGR-115RE was retired on 12 June 2007.
Operating Frequency | 902 to 928 MHz |
Type | Frequency Hopping Spread Spectrum (FHSS) Transceiver |
Modulation | GFSK, 115.2 kbps or 153.6 kbps |
Hopping Bands | 7, user selectable |
Hopping Channels | 50 to 112, user selectable |
Frequency Hopping Patterns | 15 per band, 105 total, user selectable |
Occupied Bandwidth | 230 kHz |
Transmitter Power Output | 100 mW to 1 W (+30 dBm) |
Antenna Connector | Type N Female |
Receiver Sensitivity |
|
Operating Temperature Range | -40° to +75°C |
Power | 6 to 30 Vdc |
Maximum Throughput | 100 kbps |
Data Interface Connector | RJ45 |
Dimensions | 16.5 x 7.4 x 5.7 cm (6.5 x 2.9 x 2.2 in.) |
Weight | 441 g (15.5 oz) |
Average Current Drain |
|
Idle | 70 mA |
Receiving | 125 mA |
Transmitting | 550 mA |
The FGR-115RE can be used in networks containing RF450 radios. Campbell Scientific does not recommend using it with our RF401-series or RF430-series radios.
The FGR-115RE does not have an RS-232 connector, and therefore requires either an NL100 or NL115 to connect it to a data logger. For this reason, Campbell Scientific recommends using it's cousin, the FGR-115RC, at the field site instead of the FGR-115RE.
We've updated our privacy policy. Learn More
Update your cookie preferences. Update Cookie Preferences