FAQs Frequently Asked Questions about Our Products and Solutions

Ask a Question Ask a Question

All FAQs (1992 total: showing 761-780)

How can the TCP/IP stack in a CR1000 or CR3000 be used?
Can the NL120 be repaired? Or does a non-functioning interface need to be replaced?
What might cause connection issues between a CR1000 or CR3000 and an NL120, resulting in lost data?
If several CR1000 or CR3000 dataloggers only have a serial interface that is used as the data highway to a SCADA network, can an NL120 be added without interfering with the current serial port data communications system?
To communicate with a CR1000 or CR3000 by TCP/IP using an NL120 or NL240, is it necessary for the data logger to have a fixed IP address?
If a CR1000 or CR3000 is connected to an NL120 and it has been assigned an IP address, can configuration changes be made on the data logger using only the IP connection?
If LoggerNet does not list the NL120, is that OK?
If a CR1000 or CR3000 is paired with an NL120 for remote access, can a second data logger be connected to the first data logger and the NL120 pull data from both data loggers?
Can a Wi-Fi device be plugged into the NL120 so that data logger communication can occur using a Wi-Fi service?
Does an NL120 work with a wireless Ethernet bridge?
Can an NL120 be used to connect multiple CR1000 or CR3000 dataloggers to the Internet?
Is there any way to update the firmware of the NL120?
Can a COM port and an NL120 be used together?
Can the NL120 be used to produce analog voltages?
Can a PDA with PConnectCE be used to set values?
Does PConnectCE allow a user to set up the same type of communication links as with LoggerNet?
After installing PConnectCE on a PDA, how is the software accessed?
If a Windows Mobile device and a PC are synchronized, does PConnectCE have to be installed on both the Windows Mobile device and the PC?
Is there a version of PConnectCE that works with an iPad?
How many devices can one copy of PConnectCE software be installed on?

Previous Next