The CS659 is a water content probe used in the Hydrosense II system (not for use with data loggers). (The CS659 is designed for use with the HS2 but not with the HS2P.) This probe has 12 cm rods; another probe, the CS658, has 20 cm rods. When ordered with the HS2 Hydrosense II Display, the CS659 is option -12. It is also available as a replacement part.
Read MoreThe CS659 soil moisture probe has been designed to aid insertion into and removal from hard soils. The probe rods use ferrule nuts to secure the rods to the probe housing. A molded plastic grip connects the probe's cable to its housing.
Measurements Made | Volumetric water content of porous media (such as soil) |
Volumetric Water Content Accuracy | 3% typical (solution electrical conductivity < 6.5 dS/m) |
Required Equipment | HS2 |
Soil Suitability | Suitable for hard soils. |
Rods | Replaceable |
Sensors | Not interchangeable |
Volumetric Water Content Resolution | < 0.05% |
Volumetric Water Content Range | 0% to 50% VWC |
Cable | Spiral, 250 cm (98 in.) extended |
Cable Length | 1.524 m (5 ft) when coiled |
Ingress Protection Rating | IP68 |
Rod Diameter | 5 mm (0.14 in.) |
Rod Length | 120 mm (4.7 in.) |
Body Dimensions | 100 x 92 x 40 mm (3.9 x 3.6 x 1.6 in.) |
Weight | 450 g (15.9 oz) |
The CS659 is used with the Hydrosense II soil content system only. (The CS659 is designed for use with the HS2 but not with the HS2P.) The rods of the CS659 and CS658 are not interchangeable.
Number of FAQs related to CS659: 4
Expand AllCollapse All
Because of the thread type used for the two sensors/rods, it is physically impossible to interchange the rods.
If measurements are needed for both depths, both the CS658 and CS659 must be used.
We've updated our privacy policy. Learn More
Update your cookie preferences. Update Cookie Preferences