RETIRED ›
This product is no longer available and has been replaced by: CM221.
CM220 Right-Angle Mounting Kit
Services Available
Free Support Yes

Overview

The CM220 right-angle mounting bracket can attach a sensor with a vertical pipe mount (e.g., most wind sensors) to a crossarm. It is compatible with pipes that have a 1- to 1.5-inch outer diameter. (For more information, refer to the Compatibility information.) The CM220 is creased during manufacture to allow pipes of varying diameters to seat snugly into the bracket. The 90° bend in the middle of the bracket allows the CM220 to fill roughly the same role as the 1049 or 17953 Nu-Rail Offset Crossover fitting.

Read More

Images

CM220 kit
CM220 kit
CM220 kit
CM220 kit attached to a crossarm (sold separately)
CM220 kit attached to a crossarm, pole, and 03002-L (items sold separately)

Detailed Description

The CM220 consists of a rectangular bracket and two 1.5 in. U-bolts.

The CM220 Right-Angle Mounting Bracket can attach a sensor with a vertical pipe mount (e.g., most wind sensors) to a CM202, CM204, or CM206 crossarm. It is compatible with pipes that have a 1.0" to 1.5" outer diameter.

The CM220 is creased during manufacture to allow pipes of varying diameters to seat snugly into the bracket. The 90° bend in the middle of the bracket allows the CM220 to fill roughly the same role as the 1049 or 17953 NU-RAIL Offset Crossover fitting.

Specifications

U-bolt and Washer Material 304 stainless steel (not passivated)
Bracket Material 12 gage, 304 stainless steel (not passivated)
Dimensions 5.74 x 5.74 x 7.62 cm (2.25 x 2.25 x 3 in.)
Weight 0.29 kg (0.65 lb)

Compatibility

Note: The following shows notable compatibility information. It is not a comprehensive list of all compatible or incompatible products.

Sensors

Product Compatible Note
014A-L
03002-L
034B-L
05103-45-L (retired)
05103-L
05106-L (retired)
05305-L
27106T-L
52202-L
CSAT3 (retired)
SI-111 (retired)
SR50A-L (retired)
WINDSONIC-L (retired)
WXT520 (retired)

Mounting Equipment

Product Compatible Note
CM202
CM202SS
CM203
CM204
CM204SS
CM206

Additional Compatibility Information

Sensors

The CM220 is compatible with sensors that have a 0.75 to 1 in. IPS (1 to 1.5 in. OD) pipe mount.

Pipe

The CM220 is compatible with user-supplied pipe that has a 0.75 to 1 in. IPS (1 to 1.5 in. OD).

Peripherals

The CM220 can be used to mount the 17992 GPS antenna and the 27084 CVF3 Mounting Stand.

Listed Under

Privacy Policy Update

We've updated our privacy policy.  Learn More

Cookie Consent

Update your cookie preferences.  Update Cookie Preferences